Microstructure and mechanical properties of AZ91D magnsium alloy by expendable pattern shell casting with different mechanical vibration amplitudes and pouring temperatures
不同机械振动振幅和浇注温度下消失模铸造AZ91D镁合金的组织和力学性能
Suo Fan, He-bao Wu, Jin-xiu Fang（武汉工程大学）
Microstructures and tensile properties of as-cast Mg-5Sn-1Si magnesium alloy modified with trace elements of Y, Bi, Sb and Sr
微量Y、Bi、Sb、Sr元素改性Mg-5Sn-1Si镁合金的铸态组织与拉伸性能
He-shuai Yu, Xue-feng Guo, Hong-bao Cui（河南理工大学）
Cooling control for castings by adopting skeletal sand mold design
通过采用骨架形砂型设计来控制铸件冷却
Jin-wu Kang, Hao-long Shangguan, Fan Peng, et al（清华大学）
Hot tearing behavior of NZ30K Mg alloy under progressive solidification
顺序凝固NZ30K镁合金的热裂行为
Ke Wang, Peng-huai Fu, Li-ming Peng, et al（上海交通大学）
Grain refinement of primary silicon in hypereutectic Al-Si alloys by different P-containing compounds
不同含磷化合物对过共晶Al-Si合金初生硅的晶粒细化作用
Benson Kihono Njuguna, Jia-yan Li, Yi Tan, et al（大连理工大学）
Segregation in squeeze casting 6061 aluminum alloy wheel spokes and its formation mechanism
挤压铸造6061铝合金轮辐中的偏析及其形成机理
Fan-bo Meng, Hong-jun Huang, Xiao-guang Yuan, et al（沈阳工业大学）
Quantitative models for microstructure and thermal conductivity of vermicular graphite cast iron cylinder block based on cooling rate
基于冷却速率的蠕墨铸铁缸体组织与导热系数的定量模型
Qing-yi Liu, Xiao-fu Zhang, Yu-cheng Sun, et al （潍柴动力股份有限公司）
Influence of niobium and yttrium on plastic deformation energy and plasticity of Ti-based amorphous alloys
铌和钇对钛基非晶合金塑性变形能和塑性的影响
Sheng-feng Shan, Hao Wang, Bing Zhang, et al（济宁学院）
Corrosion and chemical behavior of Mg97Zn1Y2-1wt.%SiC under different corrosion solutions
Mg97Zn1Y2-1wt.%SiC在不同腐蚀液中的腐蚀与化学行为
Di-qing Wan, Yan-dan Xue, Jia-jun Hu, et al（华东交通大学）
Shear bands of as-cast and semi-solid Ti48Zr27Cu6Nb5Be14 bulk metallic glass matrix composites
铸态和半固态Ti48Zr27Cu6Nb5Be14大块金属玻璃基复合材料的剪切带
Xin-hua Huang, Lin-hao Zhu, Hong-min Guo, et al（南昌大学）